We offer timber cleanser/ restorer

Composition:

2.5% dicarboxylic acid, 30% benzalkonium chloride, 67.5% water. For cleaning and washing timber before covering with alkyd paint or for restoring terraces due to whitening effect. When treating timber with a hard brush, until the surface has fully dried, the whitening effect will be increased. It is advisable to use the restoring cleanser during days with increased air humidity %. It can be used on masonry, slate and tile surfaces (always test it on small surface area before application). To be applied with pulveriser, roller or brush 1 litre of the liquid can cover from 3 to 8 m2 of surface (depends on surface), drying time from 30 minutes to 4 hours (depends on weather conditions). When working with this solution protective goggles must be used. Avoid contact with skin and eyes. In case of contact with skin and/or eyes, rinse with large volume of water and seek medical help. Liquid can cause skin burns and damage eyes. Do not allow it to enter water basins!